Environmentally Friendly Water Cooling Air Conditioner System High Efficiency

The enclosed design of a hyperbaric oxygen chamber makes temperature control crucial. Our compact water-cooled & heating air conditioner is engineered to operate safely in oxygen-rich environments without risk of fire caused by electrical short circuits. It uses a low-voltage 24V DC system, ensuring both safety and energy efficiency. The unit provides efficient cooling and heating to maintain optimal chamber comfort.

Product Advantage 
• Compact & Lightweight
Easily fits into small hyperbaric chambers without occupying excessive space.
• Safe Low-Voltage Operation
Operates at under 24V DC, minimizing risk in oxygen-enriched environments.
• Fire-Prevention Design
No open electrical sparks—significantly reduces fire hazards inside oxygen chambers.
• Efficient Cooling & Heating
Supports precise temperature adjustment (8°C–28°C), providing year-round comfort.
• User-Friendly Interface
Intuitive control panel allows easy water filling and temperature setting.

Detailed Parameter

Application Scenario 
Ideal for use in soft-shell hyperbaric o×ygen chambers, this mini air conditioner is space-saving (440×190×165mm) and operates with a safe low-voltage DC power supply. It is suitable for home users, health clinics, wellness centers, and commercial recovery facilities needing quiet, efficient, and fire-safe cooling solutions.

Scene Graph

Instructions For Use
1.Connect the unit’s water inlet and outlet to the corresponding pipes of the indoor system, ensuring accurate alignment.
2.Initial Water Filling: Remove the plugs from the “water inlet” and “e×haust port” on the unit’s rear. Pour clean water into the inlet until full (appro×. 1000ml).
3.Power up the unit and press both "" and ""  buttons on the controller to activate the “water filling” mode. Continue adding water until completely filled.
4.Once full, replace the plugs and e×it the water filling mode by long-pressing “” and “”
5.To turn the unit on or off, press the power button “”
6.The controller allows temperature setting for outlet water, indirectly reflecting the o×ygen chamber’s internal temperature. The factory setting is 9℃, adjustable from 8℃ to 28℃ via the "▲" + "▼"  button.
7.Press the “” button to check operating data (optional). Press “” to go back.